22
7.7. Quick-release axles
To achieve significantly easier transport of your
wheelchair, the wheels are equipped with quick-release
axles as standard:
• Press on the locking button of the quick-release axle
with a finger and remove the wheel (Fig. 24).
• When reattaching the wheel, simple push the wheel
back into the mount. At the same time, press the
locking button.
Ensure when pushing back in that the quick-
release axle is pushed! Check after pushing back
in that the wheel is firmly attached by pulling it
towards you without operating the locking but-
ton of the quick-release axle.
7.8. Seat height adjustment
The position of the drive wheel is a criterion for easy, com-
fortable and pleasant use.
• The drive wheels and steering wheels can be adjusted
vertically to allow the seat height to be adjusted.
• The wheelbase can be extended by turning the adapter
block by 180°. This increases the stability against tip-
ping backwards (note the assembly instructions)
Fig. 24