E
n
g
li
s
h
Bischoff & Bischoff GmbH • 03.01.2012
25
9. Accessories
9.1. Tilt protection/anti-tilt
rollers
To mount tilt protection, proceed as follows.
• Remove the rubber profiles of the tip assist
• Push the round profile for the tilt protection onto the
lower side frame tube.
• Attach the tilt protection with the M6x35 bolt and lock-
nut M6 in the hole in the frame provided.
9.2. Activity tray
With combined side parts, put in the full position. With
side parts with long arm cushions, the tray is simply pus-
hed onto the armrests from the front with the guides pro-
vided (Fig. 30). To remove the activity tray, simply pull it
out again.
With desk side parts with armrests, the tray is placed with
the guides supplied and attached with star head screws
(Fig. 30). To remove the activity tray, first unscrew the star
head screws and pull the tray out.
Fig. 29
Fig. 30
Pyro Light /
Pyro Light XL
Always use the anti-tilt mechanism in pairs.