Bischoff & Bischoff GmbH |01.11.2019 - revision: 1
EN
41
40
Senio
| Rollator
Rollator |
Senio
7. Care instructions for the user
7.1. Cleaning
•
The frame components of the rollator can be wiped with a damp
cloth. You can use a standard mild, soap-based cleaning agent if
they are very dirty.
•
The wheels can be cleaned with a damp brush with plastic bristles
(do not use a wire brush).
•
Push handles, armrests and seat cushion can be wiped off. Again,
use a mild household cleaning solution.
•
Then dry your rollator with a soft cloth (e.g. tea towel).
•
Do not use a high-pressure cleaner
7.2. Disinfection
•
The rollator must be thoroughly cleaned prior to disinfection.
•
For disinfection, use a standard disinfectant. Please follow the
instructions of the manufacturer regarding handling such as
exposure time, etc.)
7.3. Rollator check by the user
7.3.1. Brake Inspection
Make sure your brakes are operating properly before each use.
It should not be possible to push the rollator away while the brakes
are activated.
The rollator should be easy to drive without grinding noises and with
good direction stability when the brakes are released.
If you notice unusual behaviour when braking, inform your qualified
mobility dealer immediately and do not use the rollator.
7.3.2. Checking the tyres
Check whether the tyres are intact every time before driving.
If the tyre is damaged, it must be repaired by an authorised dealer.
8. Maintenance tips for retailers
We recommend that the brakes of the rollator be inspected by the
mobility dealer every six months.
If faults or defects at the rollator are found, it must be returned to the
dealer for repair immediately.
The dealer can receive the required information and documentation for
repair and service on request. A training program is also available for
dealers.
B+B customer service is available at +49 (0)700/60007070.
9. Storage/shipping
If the rollator is to be stored or shipped,it is advisable to retain the
original packaging.
Your rollator will have an optimum protection against environmental
influences during storage and transport.
