4
Figure 5
TO RAISE GOAL:
Place the end of a suitable lifting pole (I.E. broom
handle) under the rim or backboard and push upward until desired height
is reached. The mechanism will automatically lock in one of the fixed
adjustment positions as unit is lowered slightly. See Figure 5.
TO LOWER GOAL:
Place pole into the black release cup of the ad-
justment mechanism, push upward to release, then lower the goal to the
lowest position. The mechanism will not lock at intermediate positions
on the way down as long as the cup is depressed. QWIK
-
CHANGE is
designed to adjust from 7 1/2' to 10' in 6" increments. See Figure 5.
21. Raise the
Rim
(N) to the highest position and measure the distance
from the top of the
Rim
(N) to the playing surface. If necessary,
adjust to the official 10' playing height by loosening
1/2" Hex
Nuts
(E) on the
4" Square U
-
Bolts
(B), then slide the entire unit up
or down the
4" Square Pole
(O).
USE CAUTION NOT TO DROP
UNIT DOWN THE
4" SQUARE POLE
(P) RISKING
PERSONAL INJURY OR DAMAGE TO THE POWDER
COATED FINISH ON THE POLE.
Retighten
1/2" Hex Nuts
(E)
once you have achieved 10'.
22. Place
Pole Cap
(K) on top of the
4”
Square
Pole
(O) to keep out
water. Install
Net
(N) and
Pole Pad
(R).
23. You are now ready for play.
24. If your QWIK
-
CHANGE mechanism becomes difficult to adjust,
lubricate all pivot points and the area in and round the height
adjustment mechanism release cup with a light machine oil.
(i.e.: sewing machine oil or WD
-
40)
