6.3 COLLEGAMRNTO DEL MOTORE ELETTRICO AL SISTEMA
Spostare il communtatore del motore nella fermata (posizione 0) prima di collegarlo.
6.4 COLLEGAMENTO A TERRA
Per proteggere l’utente dallo shock elettrico, il motore deve essere collegato in modo giusto a terra.
I motori sono dotati con tre cavi e i connettori loro specifici. Deve essere usata la scatola a terra giusta per
collegare i motori. Nel caso in cui le scatole non sono disponibili, deve essere usato un adattatore a terra, prima
di collegare i connettori.
6.5 CAVI D’ESTENSIONE
Usare sempre dei cavi d’estensione con filo collegato a terra ed il suo connettore relativo con collegamento a
terra nei commutatori tubolare ed esterno, acestea che useranno il commutatore esterno su motore.
Non usare dei cavi danneggiati o usati. Evitare degli incarichi grandi sui cavi.
Per stabilire la sezione trasversale seguire questa procedura.
6.6 PROCEDURA PER STABILIRE LA SEZIONE TRASVERSALE NELL’ESTENSIONE DEL
CAVO
Da realizzare le seguenti verifiche e prendere la piu alta sezione del cavo:
1. Resistenza holmic e cavo induttivo con la tensione permessa di 5%, cochin=0, 8 tramite la frequenza e curva
tensione
L’ inizio della curva con il prodotto: Intensita’ x Lungghezza=10x100=1000 Otteniamo una sezione di 4 mm 2.
Riscaldamento permesso del cavo giusto. VDE tabella minimo (sezione trasverdale richiesta).
I. e. per10 A, in base al tabella per 15 A o inferiore, la sezione e’ di un 1 mm.
Di seguito, la sezione scelta = 4mm, Sempre scegliere la piu indicata sezione trasversale da quelle due verifiche.
Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
17