RECOMENDATIONS OF USE OF CONCRETE VIBRATOR
1. Choose the type of vibrator adequate to the dimensions of the structure to vibrate, the distance among the
reinforcement and the slump cone. It is recommendable to have an additional concrete
vibrator.
2. Before starting check that the concrete vibrator is in good use and it works correctly. Use the means of safety
and protection.
3. Pour the concrete in the structure avoiding high heights. Try to pour leveled the concrete. The recommendable
between 30 and 50 cm.
4. Introduce the vibrator vertically in the concrete mass without moving it horizontally. Do not use the vibrator to
push the concrete horizontally.
5. The time of vibration in each point depends on the type of the concrete, the size of the vibrator and other
factors.
POWER UNIT CHARACTERISTICS
POWER UNIT CHARACTERISTICS
Model
VIB-E
VIB-EE
Engine type
Power
Engine revolutions
Vibrating head dimensions
Shaft lenght
Equipment weight
Dimensions (mm)
230V-50Hz
0.55
2800 rpm
28-32-38-45
4 m
5 kg
320x200x280
230V-50Hz
1.5
15.000 rpm
38-45-58
4 m
5.4 kg
345x244x229
VIB-DE
230V-50Hz
2.3
18.000 rpm
38-48-58
4 m
5.4 kg
354x244x229
POWER UNIT CHARACTERISTICS
Model
VIB-S
RVB-S
Engine type
Power
Engine revolutions
Vibrating head dimensions
Shaft lenght
Equipment weight
Dimensions (mm)
Subaru EX17/EY20
5.7
3400-3600 rpm
38-45
4 m
24 kg
450x380x460
Subaru EX035
1.6
3400-3600 rpm
-
rigla: 1.8-2.5-3-3.7-4.5
15 kg
-
RVB-H
Honda GX35
1.3
7000 rpm
-
rigla: 1.8-2.5-3-3.7-4.5
20 kg
-
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
46