Keyfree RF manual Ver. 2.1
Cdel: Delete the
registration card
1. Press E button for 2 seconds (setting menu entry)
2. D button pressed, the
menu changed. Select the “Cdel” and then press E
button to confirm.
3.
Input the pin code (Default PIN code: “0000”)
4. Select Cd1, Cd2, Cd3, Cd4, Cd5, Cd6, Cd7 with D button and then confirm
with E button to delete.
5. Display the “donE” and completed.
Tadd: Phone
number
registration
1. Press E button for 2 seconds (setting menu entry)
2. D button pressed, the menu changed. Select the “Tadd” and then press E
button to confirm.
3. Select the TA1, TA2, TA3 with D button (Three contact numbers can be
registered)
4. Final phone number should be pressed 2 seconds with E button to end.
* When entering phone number, select the “-“symbol identify more clearly.
For example 010-1234-5678
Tdel:
Phone number
delete
1. Press E button for 2 seconds (setting menu entry)
2.
D button pressed, the menu changed. Select the “Tdel” and then press E
button to confirm.
3. Select the Td1, Td2, Td3 with D button and press 2 seconds with E button
to end.
4. Display the “donE” and completed.
dCtL: Phone
number display
type
1. Press E button for 2 seconds (setting menu entry)
2. D button pressed, the menu changed. Select “dCTL” and then press E
button to confirm.
3. Select the
“Step”, “Flou” with D button and press 2 seconds with E button to
end.
4. Dis
play the “donE” and complete.
rSt: Factor Reset
1. Press E button for 2 seconds (setting menu entry)
2. D button pressed, the menu changed. Select “rSt” and then press E button
to confirm.
3. Input the pin code (Default PIN code: “0000”)
* Final pin code number should be pressed 2 seconds with E button to end.
4. Display the “donE” and complete.
* Factory reset function allows your registered phone number, and registered
card will be deleted.
* Notices
1) The menu will exit in case of no input within 3 seconds.
2) To confirm the menu press the E button 2 seconds.
3) If you forget your old pin code, it can be recovered only at factory. Therefore, if you
change your pin code is always required a separate record. Thus, it is strongly
recommended not to change the factory default PIN code
“0, 0, 0, 0”.
