background image

Warranty

Service

This warranty gives you specific legal rights, and 

you may also have other rights which may vary 

from country to country. If you need additional 

instruction regarding this warranty or have 

questions regarding what it may cover, please 

contact BISSELL® Commercial Consumer Care by 

e-mail or telephone as described below.

Limited One-Year Commercial Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS 

identified below, upon receipt of the product 

BISSELL Commercial will repair or replace (with 

new, refurbished, lightly used, or remanufactured 

components or products), at BISSELL 

Commercial’s option, free of charge from the 

date of purchase by the original purchaser, 

for one year, any defective or malfunctioning 

part. See information below. This warranty 

does not apply to fans or routine maintenance 

components such as filters, belts, or brushes. 

Damage or malfunction caused by negligence, 

abuse, neglect, unauthorized repair, or any other 

use not in accordance with the user guide is not 

covered.

BISSELL Commercial is not liable for incidental 

or consequential damages of any nature 

associated with the use of this product. BISSELL 

Commercial’s liability will not exceed the 

purchase price of the product. Some countries do 

not allow the exclusion or limitation of incidental 

or consequential damages, so the above 

limitation or exclusion may not apply to you.

*Exceptions and Exclusions From the 

Terms of the Limited Warranty

This warranty is exclusive and in lieu of any 

other warranties, either oral or written. Any 

implied warranties which may arise by operation 

of law, including the implied warranties of 

merchantability and fitness for a particular 

purpose, are limited to the one-year duration 

from the date of purchase as described above. 

Some countries do not allow limitations on how 

long an implied warranty lasts so the above 

limitation may not apply to you.

Note:

 Please keep your original sales receipt. It 

provides proof of date of purchase in the event 

of a warranty claim.

If your BISSELL Commercial product should require a service, for information about repairs and 

replacement parts, or for questions about your warranty, please contact the distributor where the 

product was purchased.
If your query remains unresolved, please visit BISSELL-commercial.co.uk.

©2022 BISSELL Inc. All rights reserved.  

BISSELL International Trading Company BV, Postbus 12874, 1100 AW Amsterdam Zuidoost, The Netherlands 

BISSELL product imported into UK by: Beam Group, Unit 400, Buckingway Business Park, Swavesey CB24 4UQ

Part Number 1633077 05/22 RevA

Summary of Contents for 64P8 Series













Reviews: