background image

2

   global.BISSELL.com

WARNING 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

 

»

Do not immerse.

 

»

Use only on surfaces moistened by cleaning 

process.

 

»

Always connect to a properly grounded outlet.

 

»

See grounding instructions.

 

»

Unplug from outlet when not in use and before 

conducting maintenance or troubleshooting.

 

»

Do not leave machine when it is plugged in.

 

»

Do not service machine when it is plugged in.

 

»

Do not use with damaged cord or plug.

 

»

If appliance is not working as it should, has been 

dropped, damaged, left outdoors, or dropped 

into water, have it repaired at an authorized 

service center.

 

»

Use indoors only.

 

»

Do not pull or carry by cord, use cord as a 

handle, close door on cord, pull cord around 

sharp corners or edges, run appliance over cord, 

or expose cord to heated surfaces.

 

»

Unplug by grasping the plug, not the cord.

 

»

Do not handle plug or appliance with wet hands.

 

»

Do not put any object into appliance openings, 

use with blocked opening or restrict air flow.

 

»

Do not expose hair, loose clothing, fingers, or 

other body parts to openings or moving parts.

 

»

Do not pick up hot or burning objects.

 

»

Do not pick up flammable or combustible 

materials (lighter fluid, gasoline, kerosene, etc.) 

or use in the presence of explosive liquids or 

vapor.

 

»

Do not use appliance in an enclosed space 

filled with vapors given off by oil-based paint, 

paint thinner, some mothproofing substances, 

flammable dust, or other explosive or toxic 

vapors.

 

»

Do not pick up toxic material (chlorine bleach, 

ammonia, drain cleaner, gasoline, etc.).

 

»

Do not modify the 3-prong grounded plug.

 

»

Do not allow to be used as a toy.

 

»

Do not use for any purpose other than described 

in this user guide.

 

»

Do not unplug by pulling on the cord.

 

»

Use only manufacturer’s recommended 

attachments.

 

»

Always install float before any wet pick-up 

operation.

 

»

Use only cleaning products formulated by 

BISSELL® Commercial for use in this appliance 

to prevent internal component damage. See the 

cleaning fluid section of this guide.

 

»

Keep openings free of dust, lint, hair, etc.

 

»

Do not point attachment nozzle at people or 

animals

 

»

Keep appliance on a level surface.

 

»

Do not use without intake screen filter in place.

 

»

Turn OFF all controls before unplugging.

 

»

Unplug before attaching the Upholstery Tool.

 

»

Be extra careful when cleaning stairs.

 

»

Close attention is necessary when used by or 

near children.

 

»

If your appliance is fitted with a nonrewireable 

BS 1363 plug it must not be used unless a 13 amp 

(ASTA approved to BS 1362) fuse is fitted in the 

carrier contained in the plug. Spares may be 

obtained from your BISSELL supplier. If for any 

reason the plug is cut off, it must be disposed 

of, as it is an electric shock hazard should it be 

inserted into a 13 amp socket.

SAVE THESE INSTRUCTIONS 

THIS MODEL IS FOR COMMERCIAL USE.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.

When using an electrical appliance, basic precautions should be observed, including the following:

WARNING 

Improper connection of the equipment-grounding conductor 

can result in a risk of electrical shock. Check with a qualified 

electrician or service person if you aren’t sure if the outlet is 

properly grounded. DO NOT MODIFY THE PLUG. If it will not 

fit the outlet, have a proper outlet installed by a qualified 

electrician. This appliance is designed for use on a nominal 

120-volt circuit, and has a grounding attachment plug that 

looks like the plug in the illustration. Make certain that 

the appliance is connected to an outlet having the same 

configuration as the plug. No plug adapter should be used 

with this appliance.

GROUNDING INSTRUCTIONS

This appliance must be connected to 

a grounded wiring system. If it should 

malfunction or break down, grounding 

provides a safe path of least resistance 

for electrical current, reducing the risk 

of electrical shock. The cord for this 

appliance has an equipment-grounding conductor and a 

grounding plug. It must only be plugged into an outlet that is 

properly installed and grounded in accordance with all local 

codes and ordinances.

Grounded

Outlets

Grounding

Pin

Summary of Contents for 64P8 Series













Reviews: