www.bissell.com
M
aintenance and care
8
After cleaning
1.
Turn power switch to OFF position.
2.
Unplug power cord from outlet.
Note: If a significant amount of for-
mula and clean water remains, it is
all right to leave it in the clean water
tank for your next cleaning task.
3.
Empty and rinse the dirty water tank after
each use, OR when dirty water reaches
the indicated maximum fill line. To remove
the tank, lift up the dirty water tank retain-
er lever and remove the tank from the unit.
4.
Disconnect the cleaning tool from the
spray trigger by pushing down on button
lock and pulling straight off
(DO NOT twist tools to remove them)
5.
Once removed from the spray trigger, all
tools can be cleaned by rinsing under
clean running water.
6.
Check spray nozzle for accumulated dirt
or debris. If necessary, clean with soft
bristle brush.
Machine storage
1.
Wipe all surfaces with a soft cloth.
2.
Wrap power cord around the cord wrap
on the back of the Yikes!
3.
Wrap flex hose around the base of the
unit and secure the spray trigger.
4.
Store unit in protected, dry area, at room
temperature (4.4º to 43.3ºC).
Tip:
Hair, string and small
objects can block the
vacuum hose or tools.
Check them regularly
for obstructions.
Retainer Lever
3.
WARNING:
Keep spray away from face.
Failure to do so may result in
personal injury.
