background image

5  

w w w. a s t o n i z e . c o m   7 8 0 . 7 0 1 . 5 1 1 2

Operations

Carpet cleaning continued:

7.

 

Cleaning strokes. Release the trigger and make one slow   

 

forward and backward pass over the same area to remove  

 

any residual dirty water and aid in drying. Repeat cleaning  

 

passes until solution being pulled up appears clean. Continue  

 

passes without pressing the trigger until you can’t see any   

 

more water being pulled up.

8.

 

Remove the dirty water tank by pulling the handle to the   

upright position and lift up. Carry the tank like a bucket to 

a utility sink or outside where you will dispose of the dirty 

water.

9.

 

Unlatch the top of the tank from the bottom by pushing the  

 

handle all the way forward and lifting the top off. Pour dirty  

 

water into the sink.

 

Note: You may notice hair and debris deposits    

 

on the carpet or in the tank that were loosened   

 

by the cleaning action (especially with newer car 

 

pets that have never been deep cleaned before).  

 

This debris should be picked up and thrown away.

10.

  Fill the clean water tank with clean hot tap water and follow  

 

instructions 2 - 7 to continue cleaning.

 CAUTION:

Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.

8.

9.

9.

Summary of Contents for BG10 10N2 Series







Reviews: