Bissell BGFS500, Care And Use Instructions Manual

6

(approx. 1minute per metre square)

Fig.7

1m

1m

Using your Bissell BigGreen Commerical
Hercules Scrub and Clean on various floor types

DO NOT USE ON CARPET

Take care not to slip over when polishing floors, 
they can become very slippery in the process. 
Only use dedicated floor products; other

inappropriate polishes and waxes may leave

the 

floor dangerously slippery.

Do not leave the product operating in one area for 
a prolonged period of time as this may damage 
your floor.

You may need a mop and bucket to clean and 
prepare your hard floor, prior to polishing with your 
Hercules Scrub and Clean.

Cleaning hard floors with heavy soiling

• Use the brush heads to loosen dried-on dirt.

• Take care not to scratch the floor if hard dirt gets

stuck to the brush heads.

Applying floor treatments

• Always read and follow manufacturer’s

instructions for floor treatment products.

• Apply the treatment directly to the floor unless

instructions indicate otherwise.

The recommended polish is Bissell BigGreen

Commerical Gloss

Floor Polish of which a

sample is supplied and available from Bissell

BigGreen Commerical.

Tips for polishing wax on hard floors

• Once the wax polish has dried on the floor  use

the blue buffing pads to polish.

• Keep the polishing head moving. Don’t stop in

one place for a long time or it will spoil the finish.

• Move at a speed of about 1 minute every 1m

2

and

follow the diagram for an even finish (Fig.7).

• A glossy finish is not always possible; this

depends on the wax or polish used and the type
of floor. Sometimes several coats of polish will
help to get a glossy finish.

Tips for removing old polish

• Carefully follow the instructions for your chosen

floor polish remover.

• Use the white pads to scrub old polish from the

floor.