(16) BISSELL BigGreen Commercial FMT Dual-Speed Floor Machine
BISSELL BigGreen Commercial FMT Dual-Speed Floor Machine (5)
1.0 Safety Instructions
READ THIS MANUAL BEFORE USING THE DUAL-SPEED FLOOR MACHINE.
KNOW THE PROPER OPERATION, CORRECT APPLICATIONS AND THE
LIMITATIONS OF THIS EQUIPMENT
BEFORE
USE.
Reduce the Risk of Fire, Electric Shock or Injury:
• This floor machine is designed for indoor use only. Do not use
outdoors. Do not expose to rain.
• Do not wash the motor with flowing water. If the motor gets wet,
seek authorized service.
• Keep the vents on this air-cooled motor free from debris. Do not
operate with the motor covered or with vents blocked. Do not use
this machine as a floor sander.
• Never operate this floor machine near flammable dusts, liquids
or vapors. Never use flammable solvents as a cleaning agent.
Engine sparks and operating heat can cause fire.
• Never handle electrical equipment with wet hands. Never operate
this floor machine with bare feet.
• Unplug the floor machine when not in use and when servicing
the equipment. To unplug, grasp the plug not the cord.
• Do not operate a floor machine with damaged handle controls,
cord or plug. If the equipment is not performing properly, seek
repair from a qualified service supplier.
• This floor machine is constructed with electrical grounding at
the plug. Operate only when connected to a properly grounded
outlet. See section 1.2 for grounding details.
• Prevent electrical cord abuse. Do not close a door upon the cord,
drive equipment over it, or run the floor machine over it. Do not
expose the cord to hot surfaces. Do not lift, pull or carry this
floor machine by the cord.
• Never operate the floor machine over sharp objects that can be
thrown out and harm the operator and damage the floor. Sweep
hard floors before scrubbing or buffing. Vacuum clean
carpets before shampooing or bonnet cleaning.
• Train your staff in proper use of this floor machine.
Notes:
WARNING – RISK OF EXPLOSION. When using this machine as a floor sander, sanding can produce
an explosive mixture of fine dust and air. Use any floor sanding machine only in a well ventilated area free
from any flames or sparks. WARNING OF POTENTIAL INJURY. THIS MACHINE HAS MOVING
PARTS – TO REDUCE RISK OF INJURY, UNPLUG BEFORE SERVICING.
