Using your
Bissell BigGreen Commerical Hercules Scrub and Clean
DO NOT USE ON CARPET
Take care not to slip over when polishing floors,
they can become very slippery in the process.
Only use dedicated floor products, other
inappropriate detergents or types of polish could
leave the floor dangerously slippery.
Do not leave the product operating in one area for
a prolonged period of time as this may damage
your floor surface.
Applying floor treatments
•
The recommended polish is Bissell Big
GreenCommerical Gloss Floor Polish of which
a sample is supplied and available from Bissell
BigGreen Commerical.
• Always read and follow the manufacturer’s
instructions.
• Apply the treatment directly to the floor unless
instructions indicate otherwise.
Scrubbing / Cleaning the floor
• Heavily soiled surfaces may require the brush
attachments are used initially to loosen any
debris. Otherwise ensure that the white
scrubbing pads are attached (see page 4).
• Turn the product on at the power socket.
• With your foot securing the head of the polisher
on the floor (1), pull the handle towards you (2)
and the product will start (Fig.10). Returning
the handle to its upright position will stop the
product.
5
Fig.
10
2
.
Pull back
to start
1
.
Place foot
on base
