4
BISSELL.com
Positioning the Machine Correctly
For more helpful tips like this, check out
support.BISSELL.com
.
To prevent leaking, ensure the machine is always in a horizontal or in an upright position.
Correct Positions
Incorrect Positions
Spot Cleaning Carpet & Upholstery
For additional tips and tricks on using your machine visit
support.BISSELL.com
.
1.
Flip the formula tank cap to
open and add formula. Click
the cap back into place.
2.
Turn machine ON by
pressing the power button.
3.
Tilt machine forward
towards the stain and press
the spray button to dispense
formula.
IMPORTANT:
Check the manufacturer’s tag before cleaning upholstery. “W” or “WS” on the tag means you can use your Pet Stain
Eraser™. If tag is coded with an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed. If manufacturer’s tag
is missing or not coded, check with your furniture dealer.
WARNING
Keep spray away from face. Failure to do so may result in personal injury.
CONTINUED ON NEXT PAGE
BISSELL.com
5
Spot Cleaning Carpet & Upholstery
(continued)
4.
Scrub the area with the
brush, keeping the nozzle flat
on the ground, as shown.
Tip:
Turn machine off while
scrubbing to allow formula to
treat the stain.
5.
For maximum suction, firmly
press the suction channel down
on the cleaning surface.
Note:
Area may be damp to
touch after cleaning.
6.
Empty dirty water tank
when it reaches the “MAX
FULL” line.
Removing & Emptying the Dirty Water Tank
We have additional tips for maintaining your machine at
support.BISSELL.com
.
1.
Empty dirty water tank when
it reaches the “MAX FULL” line.
2.
Turn machine OFF. Squeeze
tank release latches and pull to
remove tank.
3.
Pull the dirty water tank
plug open and empty.
Note:
Plug remains attached to
tank during emptying.
4.
Press firmly on center of
plug to close the tank.
5.
Press the dirty tank back
into the machine until it clicks
into place.
Suction
Channel
