Sm artTem p
™
Ready Light does n ot illu m in ate.
Possible Causes
Remedies
The Sm artTem p
™
switch is
Turn On the Sm artTem p
™
switch.
not turned ON.
The m achine Power Switch is
Both switches m ust be ON to activate the
not turned ON.
Sm artTem p
™
Ready Light.
Sm artTem p
™
Power Switch does n ot illu m in ate.
Possible Causes
Remedies
The m achine Power Switch is
Turn On the Sm artTem p
™
switch.
not turned ON.
Both switches m ust be ON to activate the
Sm artTem p
™
Ready Light.
Redu ced spray or n o spray.
Possible Causes
Remedies
Bladder m ay be em pty.
Refill tank with hot tap water.
Sm artMix
®
Bottle m ay be em pty.
Fill with Fiber Cleansing Form ula.
The filter m ay be clogged.
Clean out filter, page 14.
Tanks m ay not be seated properly.
Turn power OFF; rem ove and reseat tanks.
Pum p m ay have lost prim e.
Turn power OFF; after 1 m inute turn ON and
depress trigger.
The Pum p Belt m ay be broken.
Turn the m achine OFF and unplug from the outlet.
To check if a Pum p Belt has broken, you will need
a flat head screwdriver. Insert the blade end
into the lower slot of the Belt Access door to release
the lower snap. If necessary, insert the blade end
into the upper slot to release the upper snap.
Exam ine for belt breakage. You should be able to
see the Pum p Belt looped around the white pulley.
If it is broken or m issing, please refer to
Part Numbers and Desc riptions
on page 17
before calling Consum er Services.
Com plete installation instructions will accom pany
the replacem ent belt.
15
Tr oubleshooting
WARNING:
To r educe the r isk of
fir e, electr ic shock or
injur y unplug fr om
outlet befor e ser vicing.
Insert
Sc rewdriver
Blade Here
Lift Here
