3
4
1 .
2 .
3 .
4 .
5 .
6 .
7 .
Slide upper handle onto lower handle.
Feed bundled power cord through tool caddy from
caddy’s flat side.
Align handle holes and tool caddy holes.
Place hex nut into back of tool caddy and hold in
place. Insert bolt from front to back turning into hex
nut until snug. Do not overtighten. Repeat steps 3 and
4 for second bolt and hex nut.
Insert 2 screws into lower two holes.
Turn until snug.
Snap tools into storage on the
tool caddy.
Wrap power cord and flex hose
as shown.
*All par ts may not be included with your model.
Mor e Tools ar e available. To or der r eplacement par ts
or tools please r efer to page 1 7 .
Flex
Hose
Power Cord
Quic k Release
Tool Caddy
TurboBrush
™
Bare Floor Attachm ent
Spraying Crevice Tool
Crevic e
Tool
Storage
4 ” Upholstery
Tool Storage
4” Upholstery Tool
16oz.
Fiber
Cleansing
Form ula
™
16oz.
Tough Stain
PreCleaner
™
16oz.
Floor
Cleansing
Form ula
™
Tough Stain Brush
Keep plenty of genuine BISSELL
Fiber Cleansing For mula
™
on
hand so you can clean whenever
it fits your schedule. Always use
genuine BISSELL deep cleaning
for mulas. Non-BISSELL cleaning
solutions may har m the machine
and void the war r anty.
The only thing you will need to assem ble your cleaner
is a Phillips head screwdriver.
Putting it together
What comes with your POWERSTEAMER
®
PROHEAT
™
PLUS:*
4 .
