13
www.BISSELL.com
Cleaning the Brush Rolls
Replacing Belts or Brush Rolls
2
3
1
4
2
1
3
Turn OFF and unplug
the machine from the
grounded outlet.
Lay the machine down
on its back or side.
Use the comb to brush
out the debris or hair from
the Brush Rolls.
What you will need: 1 Phillips-head screwdriver & 1 flathead screwdriver
Here you should see one (1) belt.
This is the Flat Pump Belt. If the
Flat Pump Belt is broken, gently
remove it from the machine. We
will replace this belt in Step 5.
Remove the Brush Cover by
lifting straight up. Remove the
cogged large pump belt. The
Brush Rolls can be replaced or
cleaned at this time, if needed.
Unplug the machine. Remove both tanks
from the machine. Press the Recline Pedal
and lay the machine on its back. Use a
flathead screwdriver to help lift and
remove the Belt Access Door.
Turn the machine on its side. The Power Button
should be facing up. Remove the 3 screws on
the Belt/Brush Access Plate using a Philips-head
screwdriver. Remove the Access Plate to expose
the brush cover and cogged large pump belt.
Summary of Contents for PROHEAT 2X REVOLUTION 15484
Page 17: ...17 www BISSELL com Notes...
Page 35: ...17 www BISSELL com Notas...
