7
www.BISSELL.com
formula
Filling Your Clean Water Tank
1
Lift the Clean
Water Tank
straight up to
remove from the
machine.
The Clean Water
Tank is at the top
of the machine.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
Unscrew the cap
from the Clean
Water Tank. Add
hot tap water to the
water fill line.
A few notes about filling the Clean Water Tank:
»
Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL® formula.
DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE.
»
When using BISSELL Deep Clean + Antibacterial formula: Only fill your
Clean Water Tank with the recommended amount of water and formula to achieve
antibacterial benefits.
2
ATTENTION
Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush
may result in premature belt failure.
3
After filling the Clean
Water Tank with hot tap
water, twist the yellow
cap back onto the tank.
Firmly insert the full-size
formula bottle into the
cap on the Clean Water
Tank and squeeze until
formula reaches the
EasyFill line.
At the bottom of
the Upper Handle,
align the Clean
Water Tank with the
grooves and slide
the tank into place.
5
4
With Trial-Size
Antibacterial Formula:
Pour into the Clean
Water Tank up to the
EasyFill line. Twist
the cap back onto
the tank.
BISSELL
For Future Use
with Full-Size
Antibacterial
Formula:
NOTICE
BISSELL Deep Clean + Antibacterial formula is only for BISSELL machines with EasyFill System.
Summary of Contents for PROHEAT 2X REVOLUTION 15484
Page 17: ...17 www BISSELL com Notes...
Page 35: ...17 www BISSELL com Notas...