Bissell spotclean 87K1 Series, User Manual

Pre-treating

Cleaning effectiveness will be enhanced if you 

pre-treat heavily stained or highly-soiled areas. 

Here’s how to do it:

1.

  Hold the tool just above the surface of 

the carpet or upholstery to be cleaned. 

Press the spray trigger to release a spray 

of cleaning solution directly onto the 

soiled area.

2.

  Wait 3-5 minutes before cleaning.

Cleaning with your SpotClean

1.

  Hold the tool approximately 1” above 

the soiled surface. Press the spray  

trigger to apply the cleaning solution  

to the soiled area.

2.

  Using the brush on the tool, gently scrub 

the area to be cleaned.

3.

  For thorough cleaning, spray additional 

cleaning solution while the brush and  

suction are in contact with the surface.

4.

  Apply downward pressure on the tool 

and pull it toward you. The suction will 

remove the dirt and cleaning solution. 

Continue until no more dirt can be 

removed.

5.

  As a final step, use “drying strokes” (by 

not pressing the spray trigger) to remove 

as much liquid/moisture as possible. 

Repeat this step as often as necessary.

O

perations

IMPoRtAnt: 

Check the manufacturer’s tag before 

cleaning upholstery. “W” or “WS” 

on the tag means you can use your 

SpotClean. If tag is coded with an 

“S” (with diagonal strike-through), 

or says “Dry Clean Only,” do not 

proceed. If manufacturer’s tag is 

missing or not coded, check with 

your furniture dealer.

Tip:

Deep 

cleaning 

stairs and 

high-traffic 

areas on 

a regular 

basis can 

prolong 

carpet life.

Tip:

Check uphol-

stery stuffing 

before cleaning. 

Colored stuff-

ing may bleed 

through the 

fabric when it 

becomes wet.

WARnIng: 

Keep spray away from face. 

Failure to do so may result in 

personal injury.

w w w . b i s s e l l . c o m  

7