background image

2

   BISSELL.ca

IMPORTANT SAFETY INSTRUCTIONS

WARNING 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

 

»

Connect to a properly grounded outlet only. See grounding instructions.  

Do not modify the 3-prong grounded plug.

 

»

Do not leave appliance when it is plugged in. Unplug from outlet when not 

in use and before servicing.

 

»

Do not expose to rain. Store indoors.

 

»

Do not allow to be used as a toy. Close attention is necessary when used by 

or near children.

 

»

Do not use for any purpose other than described in this user guide. Use only 

manufacturer’s recommended attachments.

 

»

Do not use with damaged cord or plug. If appliance is not working as it 

should, has been dropped, damaged, left outdoors, or dropped into water, 

have it repaired at an authorized service center.

 

»

Always install float before any wet pick-up operation.

 

»

Do not pull or carry by cord, use cord as a handle, close a door on cord, or 

pull cord around sharp edges or corners. Do not run appliance over cord. 

Keep cord away from heated surfaces.

 

»

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

 

»

Do not handle plug or appliance with wet hands.

 

»

Keep appliance on a level surface.

 

»

Do not put any object into openings. Do not use with any opening blocked; 

keep openings free of dust, lint, hair, and anything that may reduce air flow.

 

»

Keep hair, loose clothing, fingers, and all parts of body away from openings 

and moving parts.

 

»

Turn OFF all controls before plugging or unplugging appliance.

 

»

Use extra care when cleaning on stairs.

 

»

Do not use to pick up flammable or combustible materials (lighter fluid, 

gasoline, kerosine, etc.) or use in areas where they may be present.

 

»

Do not use appliance in an enclosed space filled with vapors given off by 

oil-based paint, paint thinner, some moth-proofing substances, flammable 

dust, or other explosive or toxic vapors.

 

»

Do not use to pick up toxic material (chlorine bleach, ammonia, drain 

cleaner, etc.).

 

»

Do not pick up anything that is burning or smoking, such as cigarettes, 

matches or hot ashes.

 

»

Use only BISSELL® cleaning products intended for use with this appliance 

to prevent internal component damage. See the Cleaning Formula section 

of this guide.

 

»

Do not carry the appliance while in use.

 

»

Do not immerse. Use only on surfaces moistened by the cleaning process.

 

»

Plastic film can be dangerous. To avoid danger of suffocation, keep away 

from children.

SAVE THESE INSTRUCTIONS 

THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS APPLIANCE VOIDS THE MANUFACTURER’S WARRANTY.

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.

When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

Improper connection of the equipment-grounding 

conductor can result in a risk of electrical shock. Check 

with a qualified electrician or service person if you aren’t 

sure if the outlet is properly grounded. DO NOT MODIFY 

THE PLUG. If it will not fit the outlet, have a proper outlet 

installed by a qualified electrician. This appliance is 

designed for use on a nominal 120-volt circuit, and has a 

grounding attachment plug that looks like the plug in the 

illustration. Make certain that the appliance is connected 

to an outlet with the same configuration as the plug. No 

plug adapter should be used with this appliance.

Grounded

Outlets

Grounding

Pin

GROUNDING INSTRUCTIONS

This appliance must be connected to 

a grounded wiring system. If it should 

malfunction or break down, grounding 

provides a safe path of least resistance 

for electrical current, reducing the risk 

of electrical shock. The cord for this 

appliance has an equipment-grounding 

conductor and a grounding plug. It 

must only be plugged into an outlet that is properly installed and 

grounded in accordance with all local codes and ordinances.

Problem

Possible Cause

Remedies

Reduced/ 

no spray

Clean Water Tank may be 

empty.

Refill tank.

Clean Water Tank may not be 

completely seated.

Turn power OFF. Remove and reseat tank.

Pump may have lost prime.

Hold end of hose below water level in tank  

to prime.

Loss of suction 

power

Tanks may not be completely 

seated.

Turn power OFF. Remove and reseat both tanks.

Dirty Water Tank is full.

Empty tank.

Troubleshooting

 Below are some of the issues you may run into. If you don’t see the issue you’re experiencing 

below, visit 

support.BISSELL.ca

.

Summary of Contents for SPOTCLEAN PROFESSIONAL LITTLE GREEN PRO 2505 Series













Reviews: