BT-410 Operator Manual 11
P/N : OPM(BT-410)EN
Bistos Co.,Ltd
Rev. 05(2013.04.12)
Section
4
Use Method
4.1
Adjustable headband
The height and size adjustable headband part call the user's head to adjust the
Head-worn light is worn
4.2
Turn on the power Method
Once the power switch button pressed remains locked in. When he turned on the
light from the light source occurs.
.
LED charging status indicator into orange charging status indicator and then
illuminated with charger must recharge.
4.3
Adjust distance of focusing light(only for standard)
250 ~ 300 mm focal length for the light to examine the treatment and
examination.
4.4
Turn off the power Method
The power switch once more to keep from pressing the button will turn off the
lights.
4.5 Adjust intensity of light(only for
“Optional Main body”)
User can adjust intensity of light using the dial at the bottom side of the “Source
of Light Part” by rotating the dial CW or CCW. The range of intensity is from
15,000lx to 30,000lx at 25cm working distance.
WARNING
: Power is turned on, please do not charge. LED light might be faulty
due to high power from charging.
CAUTION
: The light of a
head-worn light
directly to the patient's eyes should
avoid. It might cause temporary vision impairment.
CAUTION
: You must turn off the
head-worn light
for battery consumption and
lifetime of a light source (LED). That may not reduce the equipment's life
expectancy.
Dial for adjusting
intensity of light
