BT-410 Operator Manual 14
P/N : OPM(BT-410)EN
Bistos Co.,Ltd
Rev. 05(2013.04.12)
Section
5
Maintenance and Cleanliness
5.1
Checking the Light Intensity
It is recommended that the intensity of the light be checked before each use, and
at least every six months.
Have a qualified technician test the intensity level and readjust the intensity
potentiometers to achieve the desired output, if required.
5.2
Cleaning
Remove dust from the exterior of the light with a soft brush or soft cloth with
tepid water. Please remove the dust and dirt on the cable, wipe the unit with a
cloth, soaked in lukewarm water (40
˚
C / 104
℉
). Kindly also wipe it with a
clinical alcohol about once a week.
5.3
Battery Disposal and Handling
Be cautious when disposing of Lithium-ion Battery pack.
Adhere to all applicable laws regarding recycling. Avoid storing battery above
60°C (140°F). If clothing or skin comes in contact with material from inside the
battery, immediately wash with plenty of clean water.
When you replace Battery pack, contact us for our technical support.
CAUTION
: Only qualified personnel should perform service and repair, than the
light should be readjusted.
WARNING
: Before cleaning, remove the battery Pack.
CAUTION
: Observe the following precautions;
- Do not use caustic or abrasive cleaners.
- Do not clean with alcohol, acetone, or other solvents.
- Never immerse the light or its components parts
