BT-410 Operator Manual 4
P/N : OPM(BT-410)EN
Bistos Co.,Ltd
Rev. 05(2013.04.12)
General Precaution on Environment
Do not keep or operate the equipment under the environment listed below.
Avoid placing in an area
exposed to moisture. Do not
touch the equipment with wet hand.
Avoid exposure to direct
sunlight
Avoid placing in an area
where there is a high variation
of temperature.
Operating temperature
ranges from 10
C to 40
C.
Operating humidity ranges
from 20% to 90%.
Avoid in the vicinity
of Electric heater
Avoid placing in an area
where there is an excessive
humidity rise or ventilation
problem.
Avoid placing in an
area where there is an
excessive shock or
vibration.
Avoid placing in an area
where chemicals are stored or
where there is in danger of
gas leakage.
Avoid dust and
especially metal
material into the
equipment.
Do not disjoint or disassemble
the equipment.
BISTOS Co., Ltd. does not take
responsibility of it.
The equipment
shouldn’t be
connect to the
power while used.
May cause it may
cause damage to
equipment
CAUTION
: Do not operate the unit if it is damp or wet because of condensation
or spills. Avoid using the equipment immediately after moving it from a cold
environment to a warm, humid location..
CAUTION
:
-The equipment conforms to Class A according to IEC/EN 60601-1(Safety of
Electric Medical Equipment)
- This equipment conforms to Level B according to IEC/EN 60601-1-2
(Electromagnetic Compatibility Requirements)
