BT-410 Operator Manual 6
P/N : OPM(BT-410)EN
Bistos Co.,Ltd
Rev. 05(2013.04.12)
Section
2
Introduction
2.1
General
This chapter provides a general description of the BT-410 monitor including:
Brief Device Description
Product Features
Model Configurations
2.2
Brief Device Description
This Head-worn light
is used for medical examination by fixing it on the head
and illuminating with condensed light to the injured part.
This unit doesn't intend
to contact directly to the patient's body and can be used for all medical field
except ophthalmology.
All material is made of the light plastic, and is consist of
mainbody and headband.
The main body is composed of a light source (LED),
main frame, and battery pack.
O
ptional accessories are consist of an astral lamp
for shadowless effect, and loupe (magnifying glass).
The battery uses a lithium-
ion rechargeable one, and using time is about 4 hours.
Full recharge takes about 4
hours.
LED's optical power will be a little decreased even though you use the unit
normally according to recommended using time.
The expectedly possible using
time is for approximately 50,000 hours.
2.3
Intended Use
The BT- 410 Head-worn light
allows doctors to examine with a clear eye onto
the affected part by wearing it onto the head.
2.4
Product Features
●
Battery pack can be separated, so separate recharging is possible
.
●
You can check necessary recharging time with LED indicator of recharging status.
●
Irradiating to up & down and left & right side is possible by pivot joint.
●
Operation is very simple, so the unit is easy to use .
2.5
Product Configuration
BT-410
system consists of the following elements. Open the packaging contains
the following accessories, please check. Also check for any damage to your
