background image

BT-410F and BT-410A Operation manual

 

P/N:410-ENG-OPM-EUR-R12 

Bistos Co.,Ltd. 

2021,05 

 

This symbol indicates that the power adaptor is for indoor use only. 

 

This symbol indicates direct current. 

 

This symbol indicates alternating current. 

 

UL Listing means that UL has tested representative samples of a product and 
determined that the product meets specific, defined requirements. 

 

This  symbol  indicates  to  not  dispose  the  device  together  with  unsorted 
municipal  waste  (for  EU  only).  The  solid  bar  symbol  indicates  that  mains 
adapter is put on the market after 13 August 2005. 

 
0.2 Warnings and cautions 

   

WARNING

 

  Do not attempt to connect or disconnect a power cord with wet hands. Make certain that 

your hands are clean and dry before touching a power cord. 

  Incorrect use of the light or the use of parts and accessories, especially LED and Battery that 

were not supplied by Bistos Co., Ltd. can damage the light, and may cause injury to the user. 

  Do  not  use  in  the  out  of  range  for  humidity,  temperature  and  atmospheric  pressure 

environment than indicated in this manual. 

  Do not use the light in the presence of gases that support combustion (for example, oxygen, 

nitrous oxide, or other anesthetic agents). 

 

CAUTION

 

  The relevant law restricts this device to sale by or on the order of a physician. 

  Do not operate the unit if it is damp or wet because of condensation or spills. Avoid using 

the  equipment  immediately  after  moving  it  from  a  cold  environment  to  a  warm  humid 
location. 

  Do not attempt to service the BT-410F and BT-410A. Only qualified service personnel should 

attempt any needed internal servicing. 

 

 
0.3 Battery warnings   

   

WARNING

 

  Do not use the device during recharging the battery. Using the device during recharging the 

battery may cause injury to the user. 

  Improper  operation  may  cause  the  internal  lithium  ion  battery  to  be  hot,  ignited  or 

exploded, and it may lead to the decrease of the battery capacity. It is necessary to  read the 
operation manual carefully and pay more attention to warning message. 

  Do not open the housing of battery pack. Only the qualified service personnel authorized by 

the  manufacturer can open  the battery  pack and  replace the  battery, and  batteries of same 
model and specification should be replaced. 

  Be careful when connecting the battery with polarity.   

  Do not use the battery near fire or environmental temperature exceeds 60 

. Do not heat 

or splash the battery or throw it into fire or water. 

  Do not destroy the battery. Do not pierce battery with a sharp object such as a needle. Do 

not hit with a hammer, step on or throw or drop the battery. Do not disassemble or modify 
the battery. The battery can heat, smoke, deformation or burning.   

  When  leakage  or  foul  smell  is  found,  stop  using  the  battery  immediately.  If  your  skin  or 

cloth comes into contact with leaked liquid, cleanse it with clean water at once. If the leaked 
liquid splashes into your eyes, do not wipe them. Irrigate them with clean water first and go 
to see a doctor immediately. 

  Properly dispose of or recycle the depleted battery according to local regulations. 

Summary of Contents for BT-410A


















Reviews: