Magicians SOCD Cleaner V2
Section 7: Configuration
INSTALLATION MANUAL & USER GUIDE
REV B
PAGE 12
Section 7: Configuration
Setup the Magicians SOCD Cleaner V2
Once the electrical installation is complete, the only thing required for setting up to configure
is to power the controller and to have a smart phone with the Magicians SOCD Cleaner V2
app installed. The app is available on both the Google Play Store and Apple App Store and is
the only way to configure the Magicians SOCD Cleaner V2. Communication to the board is
over BLE. Search “Magicians SOCD Cleaner V2” to find the app.
Initiating a BLE Connection
Open the app and you will be greeted with a screen to scan for nearby Magicians SOCD V2
devices. When you press Scan, it will take a few moments for this to take place. If more than
a minute passes by with nothing happening, ensure that the Magicians SOCD Cleaner V2 is
powered on. If it is, restart the app and try again. After scanning, a drop menu will show up
saying to Choose Your Device. Pressing this will show all Magicians SOCD Cleaner V2
devices detected nearby, simply scroll down the menu until you find yours. Chances are only
one will show up. Once it is chosen, you will be able to connect to the board. The board will
indicate it is connected to BLE by turning the status RGB LED from white to blue.
Each Magicians SOCD Cleaner V2 has a unique BLE ID it
advertises. It will always begin with
“MAGICV2:”, followed by a
unique sequence of characters and/or numbers. Be sure to
remember yours so you don’t accidently connect to someone
else’s board!
