Magicians SOCD Cleaner V2
Section 7: Configuration
INSTALLATION MANUAL & USER GUIDE
REV B
PAGE 13
Main Menu
The main menu shows all the latest features. Upon initial release, the following features be
available:
•
Change SOCD cleaning modes, with 25 to choose from.
•
Create your own SOCD rules.
•
Save between four different profiles.
•
Change the cleaned output connector mapping.
•
Change the cleaned output connector logic convention.
•
Real time testing of cleaned outputs.
•
Change the type of BLE advertising.
•
Read PCB and app information.
Updates occur on occasion so be sure to check back on our website or discord to see if there
any to apply.
The on-board status RGB LED will turn green whenever a
direction button is pushed. When not connected to BLE,
neutral is indicated as white, but when connected to BLE it is
indicated as blue.
Cleaning Modes & Testing
Cleaning modes are chosen per axis until using the SOCD rule maker. Simply press the mode
you want, and it will be instantly configured on the profile you have selected. Press the Test
button to bring you to the Test Mode for live, detailed testing. Upon initial release, the
following modes will be available:
•
Clean to neutral
•
Clean to min cardinal (left or down)
•
Clean to max cardinal (right or up)
•
Clean to last input priority
•
Bypass cleaning
•
Custom SOCD rule
Mapping & Logic
It is possible to map the cleaned output connector direction outputs making it possible to
interface with any combination the control board requires. Logic will invert the signals;
negative logic is the most common. If using a zero delay board, be sure to switch this over to
positive logic.
BLE Mode
By default, the Magicians SOCD Cleaner V2 will automatically advertise itself to be connected
to by anyone that has the app downloaded. It is possible to not advertise at all. Simply hold
the left and right buttons while powering up the controller. This makes it easy to stop others
