2
User Quick
Guide
2D Bluetooth Scanner
Please read this manual thoroughly and carefully before you start using this device.
Please keep this document in a safe and easy to access place for future reference.
This Guide is to introduce basic ways to use this device:
We have tried to avoid any mistake in this manual. However, if there is any trouble or
loss caused by this manual, we are sorry that we are not able to be responsible for that.
This document is a preliminary version and will be subject to change without prior notice.
For safe use concern, please pay special attention on the
following notices:
This device has taken safety as first priority during design stage. To avoid any potential
accident, please be cautious on the following alert points:
Danger!
●
Please do not put the device into water which may cause short-circuit or fire.
●
Please do not stock this device under conditions of high temperature which will
cause the battery to become hot, fire, or broken etc. leading to failure and safety
concerns.
●
Please do not put this device in place close to open fire.
Warning!
●
Please stop using immediately when there is any unusual smell or overheat during
charging or operation.
●
When the charging time is noticed longer than standard required ( CHARGING LED ,
RED, is still ON ), please stop charging immediately.
●
Please do not use the AC adapter outdoor. Please do not wrap the AC adapter with
cloth which will block heat dissipation and will cause electric shock or fire.
●
Please charge this device in place without any water-spray or moisture.
If there is any dust on the plug of AC adapter, please wipe clean using dry cloth to
avoid fire accident.
●
Please do not use wet hand to pull out the AC adapter which might cause electric
shock.
●If the power or USB cable is seriously twisted or broken, please stop using
immediately or it may cause electric shock, short-circuit, or fire.
●
Please do not use CYCLOPS2 AC adapter on any other different devices.
NOTICES:
●
Please
don’t put it close to open fire or directly under the sunlight as that will cause
enclosure deformation then damage the device.
●
Please do not drop this device with strong strike and impact.
● Please stop using immediately when there is any liquid or dew on the device.
●
Please make sure the AC adapter is properly plugged into the wall outlet socket or it
might cause electric shock, short-circuit, or fire.
●
When you are trying to pull out the plug, please do not pull the cable portion only but
must pull from the connector portion.
●
Except charging, please remove the AC adapter plug from the wall AC outlet socket
or it will cause fire accident.
● Please do not put any heavy weight on top of this device as it might cause device
enclosure crack then lead to cutting injury.
Important Notices When Using:
● Before replacing battery pack due to failure, shortened life, or any other unusual
behavior, please confirm if the device has been used correctly and there has no user
operation issue involved.
● It is possible there will be some missed data or interference encountered during the
wireless transmission. It is not a situation can be controlled by the manufacturer.
●Please do not use any alcohol, benzene, organic solvent, cleaner liquid, or
steel-wool on the surface of this device.
● Please do not scratch the surface of Scan Window in any way as which will cause
problem on barcode scanning.
Bluetooth:
●This device is designed based on Bluetooth standard specifications but compatibility
problem might be encountered if trying to connect with other BT device.
● Before using this device, please make sure there is no other wireless device been
operated in the same application area within short distance as that may cause
wireless signal interference.
Signal Interference From TV or Radio:
● Sometimes, data transmission or receiving might be failed due to signal interference
from TV or radio near by.
Special Features:
● Compact and light weight design,easy to use and carry.
● CYCLOPS2 is implemented with CMOS Image scanner which can read both 1D and
2D barcodes.
● CYCLOPS2 can read inverted barcode.
● You can charge CYCLOPS2 via AC adapter or through the USB connection of host
device.
● With Bluetooth connection, CYCLOPS2 can transmit the scanned data to PC, laptop,
or other mobile devices.
● If you use iPhone or iPad (iOS), you can use the software keyboard on them. Also
up to 8,000 scanned data ( size per data: 2048-Byte) can be stored with its massive
storage function.
● When you are using CYCLOPS2 USB port to connect with host devices, it will be
recognized as a mobile storage device and data stored inside can be easily retrieved
and uploaded.
● Built-in Real-Time Clock (RTC) function can save date & time together with scanned
data.
● You can also save the configuration file into host device which can be duplicated into
multiple CYCLOPS2 to simplify the set-up process.
● Buzzer volume can be configured in OFF/ High/ Mid/ Low 4 levels.
Items Inside the Package:
Please confirm if there is any item missing in the package when you open it. Contact
your supplier immediately if there is anything missing or broken.
● CYCLOPS unit ● Wrist Strap ● Quick guide
● USB cable (data transfer) ● Cradle ● Charging cable for cradle
● AC Adaptor (optional)
Key Features on the device:
Scanner Window
●
LED Indicator Status:
Scan LED
Barcode Scanning Indication:
Green light ON: Successful Reading
Red light ON: Decoding Failed
Blinking Orange: System Firmware is Updating
Orange: System Firmware Update Completed
Battery LED
Battery Status
Green light ON: Charging Completed
Green light blinking: Battery Power Low
Red light ON: Battery Charging in Process
Red light blinking: Charging Failed
Bluetooth LED
Bluetooth Connection Indication:
Blue light fast blinking: Waiting for Paring Connection
Blue light blinking slowly: Pairing Successful and Data
Transmission in Process
SCAN (Power) key
Press SCAN key for 3-second to power ON CYCLOPS2
FUNCTION key
Function of this key differs depending on various modes
CYCLOPS2 been configured into
Charging Contacts
For connections of charging tools
USB Port
For Host Device USB Port Connection
Reset Button
Press this button to reset CYCLOPS2 into Factory Default
Strap Posts
For Wrist Strap Installation
Operating Modes:
There are three different operating modes for various application needs.
● Real-Time Mode (choice between HID or SPP profile)
Scanned data will be transmitted via Bluetooth to host device right after scanning.
Error message will also be shown if the transmission is failed.
● Batch Mode
Scanned data can be saved into memory after scanning. Stored data can be
retrieved via one of the following two ways:
(1) Using BT SPP program to retrieve data file; or
(2) Connecting CYCLOPS2 with host device via USB port to retrieve data file.
● Hybrid Mode
Under this mode, CYCLOPS2 will transfer scanned data automatically (similar to
Real-Time Mode). When CYCLOPS2 is out of BT communication range or been
disconnected, CYCLOPS2 will save the scanned data into memory first and transfer
the data file in FIFO order after BT connection been re-established or CYCLOPS2 is
back in communication range.
Bluetooth LED
Scan LED
Charging Contacts
Reset Buttom
USB Port
Strap Posts
Battery LED
SCAN Key
FUNCTION Key
