User Guide
Dial-up networking
Creating an access setup
1. Access the connections
2. Select the
New
option from the list. The first box appears, enabling you to
enter the name to be assigned to your configuration.
3. Press the
Next
button. The application will list software that can be run while
this connection is live. This choice is optional.
4. Press the
Next
button. If your service provider handles different types of
network
Warning!
Using "high speed" networks such as GPRS is subject to subscription options.
5. Select a
Context number
. Certain telephone devices offer connection profiles
containing all settings for use over "high speed" networks, such as GPRS. In order
to avoid overwriting a pre-programmed setup on your mobile, select a free storage
profile using its context number. If your service provider is recognized by the
application, you will be able to use the default settings directly; to do this, check the
Use standard settings
box.
ƒ
Specify the APN or phone number, Name and Password settings as
required. Repeat for subsequent screens for IP address, DNS and QOS if
applicable.
6. Press
Next
. The following dialog box enables a backup configuration to be
created for high-speed network access, to be applied if the high-speed connection
is unsuccessful. If you request a backup configuration to be created, the application
will display the entry screens shown previously for "standard" networks.
Changing an access setup
1. Access the connections list.
2. Click the connection to be changed or display the context menu by holding the
stylus on the connection to be changed and select the
Change
option.
3. Follow the procedure for creating access setups.
Deleting
1. Access the connections list.
2. Display the context menu by holding the stylus on the connection to be changed
and select the
Delete
option.
P2-25
