background image

   L3+   

Server

Installation   Guide

Document   Version   0.1

April   2017

© Copyright Bitmaintech Pte.Ltd.

   20

0

7–   20

1

7.   All   rights   reserved.   

Bitmaintech  Pte.Ltd.

   

 

(Bitmain)   

 

reserves   

 

the   

 

right   

 

to   

 

make   

 

corrections,   

 

modifications,   

 

enhancements,   

improvements,   and   other   changes   to   its   products   and   services   at   any   time   and   to   discontinue   any   product   or   
service   without   notice.   

Customers   

 

should   

 

obtain   

 

the   

 

latest   

 

relevant   

 

information   

 

before   

 

placing   

 

orders   

 

and   

 

should   

 

verify   

 

that   

 

such   

information   

 

is   

 

current   

 

and   

 

complete.   

 

All   

 

products   

 

are   

 

sold   

 

subject   

 

to   

 

Bitmain's   

 

terms   

 

and   

 

conditions   

 

of   

 

sale   supplied   at   the   time   of   order   acknowledgment.   

Bitmain   

 

warrants   

 

performance   

 

of   

 

its   

 

products   

 

to   

 

the   

 

specifications   

 

applicable   

 

at   

 

the   

 

time   

 

of   

 

sale   

 

in   

accordance   with   Bitmain's   standard   warranty.   Testing   and   other   quality   control   techniques   are   used   to   the   
extent   Bitmain   

Summary of Contents for AntMiner L3+

















Reviews: