-‐ 15 -‐
L3+
Server
Installation
Guide
6. Administering Your
Serv
er
2.
For
Keep Settings
:
■
Select the check box to keep your current settings (default).
■
Clear the check box to reset the
serv
er to default settings.
3. Click the
(Browse)
button and navigate to the upgrade file. Select the upgrade file, then click
Flash
image
. A message appears notifying you if the L3+
server
firmware can be upgraded and if yes, will
then proceed to flash the image.
4. When the upgrade is completed, the following message appears:
5.
Click one of the following options:
■
Reboot
-
to restart the
serv
er with the new firmware.
■
Go Back
-
to continue mining with the current firmware. The
serv
er will load the new firmware
next
time it is restarted.
6.3 Modifying Your Password
To change your login password:
1. In
System
, click the
Administration
tab.
2. Set your new password, then click
Save & Apply
.
6.4 Restoring Initial Settings
To restore your initial settings
1.
Turn on the
serv
er and let it run for 5 minutes.
2.
On the controller front panel, press and hold the
Reset
button for 10 seconds.
Resetting your
serv
er will reboot it and restore its default settings. The red LED will
automatically flash once every 15 seconds if the reset is operated successfully.
