manualshive.com logo in svg

BITMAIN S5, Manual

The Yamaha S5 Owner's Manual is a comprehensive guide for users to unlock the full potential of their Yamaha S5 device. Packed with detailed instructions and illustrations, this manual is a must-have for S5 owners. Download your free copy today from our website 88.208.23.73:8080 and elevate your Yamaha experience.

Share
Download
background image

S5 

Server 

Manual

Last updated: 3/26/2015

Page 8 of 11

Page 8 / 11 

software  will  take  approximately  10  seconds  to  connect  to  the  server,  and  then  the  client 

software continues to  run  after settings are saved. If either the Off/On  is selected  to  ‘OFF’ or 
the UID is left blank,  

‘Link’

 will remain disabled.

4.3.4

 

Once ‘Link’ is enabled, the ‘Addr’ will become fixed and cannot be updated by 

customers. This refers to Bitmain’s monitoring server address. 

6

 

Server Status 

You can check the operating status of your server on ‘Status’ page. 

ASIC#: Number of chips detected in the chain 
Frequency: ASIC frequency setting 
Temp: Temperature, centigrade 
ASIC status: o stands for OK, x stands for error. 

Summary of Contents for S5












Reviews:

No comments

Related manuals for S5

CAME Z Series Instructions preview
Z Series
Brand: CAME Pages: 4
3dsimo MultiPro Instructions For Use preview
MultiPro
Brand: 3dsimo Pages: 2
Wacker Neuson BS 50 Repair Manual preview
BS 50
Brand: Wacker Neuson Pages: 156
Lambda 303 Series Operator'S Manual preview
303 Series
Brand: Lambda Pages: 56
Lakeshore 642 User Manual preview
642
Brand: Lakeshore Pages: 122
Paoli DP05-34B Operating Instructions Manual preview
DP05-34B
Brand: Paoli Pages: 68
Wacker Neuson ARFU 36/6/120 Operator'S Manual preview
ARFU 36/6/120
Brand: Wacker Neuson Pages: 36
TDK-Lambda GEN 8-400 ABCDE User Manual preview
GEN 8-400 ABCDE
Brand: TDK-Lambda Pages: 96
South bend SB1027F Manual preview
SB1027F
Brand: South bend Pages: 90
Schlage PS902 Installation Instructions preview
PS902
Brand: Schlage Pages: 4
Nitta NittaBeltPoly PI-30 Operation Manual preview
NittaBeltPoly PI-30
Brand: Nitta Pages: 16
Prince Castle 164-a Operating Instructions preview
164-a
Brand: Prince Castle Pages: 4
Yardworks YW20PTP Instruction Manual preview
YW20PTP
Brand: Yardworks Pages: 18
Wacker Neuson DPU 100-70Les Operator'S Manual preview
DPU 100-70Les
Brand: Wacker Neuson Pages: 112
Matco Tools MT1857 Manual preview
MT1857
Brand: Matco Tools Pages: 10
Grizzly G0726 Owner'S Manual preview
G0726
Brand: Grizzly Pages: 80
Com-Power CDN M Instruction Manual preview
CDN M
Brand: Com-Power Pages: 38
Alpha GDSA-08 User Manual preview
GDSA-08
Brand: Alpha Pages: 4

Brands by name

Popular brands

Load more brands