16
www.bitrek.eu
sales@bitrek.eu
+372 880 78 78
respond to SMS from the stored in the memory authorized phone
numbers only. If the login and password are set by SMS, they shall be
specified in each SMS with commands.
Adjustment of I/O elements
The tracking device “BI-530С TREK” is able to collect, process and
send to the server the data received from various sensors. Each sensor is
an I/O element and has a group consisting of 6 parameters for setting.
For example, to set the value of power supply voltage level to the server,
use group of parameters of ID 0410/0411/0412/0413/0414/0415. These
options have the following structure:
0410/0411/0412/0413/0414/0415
First 3 numbers (green) refer to parameter group number to
configure the I/O element.
Last
number
(grey)
is
a
parameter
number.
6 parameters (from 0 to 5) are available for a single I/O element.
Possible values of these parameters are presented in Table 5.
Table 5 – List of parameters of I/O elements
Parameter
number
Description
Possible values
0
Enable/disable I/O
element
0 – disabled; 1 – enabled
1
Priority of I/O element
at transmission
0 – low; 1 – high
2
Upper limit
(depending on the type of I/O
element)
3
Lower limit
(depending on the type of I/O
element)
4
Setting of the type of
the generated event
0 – entering the range;
1 – leaving the range;
2 – returning/leaving to/of the
range;
3 – monitoring;
4 – moni entering the
range;
5 – moni leaving the
range;
6 – moni return to/leaving
the range;
7 – generation of the event to
change the input value to a
predetermined value;
8 – generation of the event to
change the input value to a
predetermined value + monitoring
5
Averaging constant
From 0 and higher
