[ 4 ]
Notice
Before filling with water, please make sure all the components are installed correctly. To prevent any leakage
which may damage the PC components, please perform a 24-hour leak test with only the pump connected to
the power supply.
Bitspower reserves the right to change the product design and specifications. These are subject to change
without notice. Product colors and accessories are based on the actual product.
When using leak tester on water cooling loop, in order to avoid product damage due to excessive pressure, the
input pressure should not exceed 0.5kg/cm
2
(Bar). If the product is damaged due to excessive pressure, it will
be the fault of the customer. DO NOT use the leak teser when there is water in the loop or the pump is running.
Bitspower recommends that customers use Bitspower Pellucid Coolant for their coolant fluid. It is also
recommended to use Bitspower Dye to create any desired color. If the customer chooses different liquid
coolants, the resulting impurities may cause peeling of the coating on some of the hardware, water channel
blockage by built-up residue, improper operation of the water pump, water tank tube breakage, and o-ring
deformation leading to leakage. Any issues related to the use of inappropriate liquid coolants will be the
responsibility of the customer.
