_______________________________________________________________________
_BITTEL
Page 3 of 11 HWD9888 (48) TSD-NS
MAIN FEATURES
This design complies with the standard of indoor digital cordless phone
technology requirements. Adopt HF numerical coding technical, using FHSS
frequency jumping technology,
5 signal paths auto select , prevent wiretap and
disturb . The Operating Distance: The phone can work well if the distance
between the Master and Handset is less than 300 meter without hindrance.
According to different frequency standard of each countries adjust to 1.9GHz
DECT.
Some features as below:
1.
It includes normal telephone set (base ) and Handset. The base and Handset
can make/answer any calls freely and one base can work with 1—4 handsets.
2.Support WDCT standard . The communication between base and handset
adopt numerical coding.
3. If power failure , base work normally to dial or answer calls.
4. The ringer and phone volume adjustable both for base and handset.
5. Handset can detect low battery and warning . Also can charge battery rapidly.
6. Busy tone can be on hook automatically
CONTROL AND CONNECTIONS KEYS
1. Power socket 2. Paper faceplate
3. Transparent faceplate 4. Charge indicator light
5. VOL +
--
Increase the volume.
6. Redial key --
Dial the last number dialed.
7. ON key
--
Make the device on working mode.
8. Ringer/Hold indicator light
9.Hold key
--
Places a caller on hold with LED indicator.
10. OFF key
--
Keep the device off working mode.
11. Digital key --Keypad for dialing mode
12. Flash key-- Enters a 600ms hook switch flash for accessing special
telephone system features.
13. MUTE key-- Press this key to shut off sound for sending without hanging
up on caller( with LED indicator).
14. VOL- Reduce the volume .
15.CALL key-- Receiving calls.
