Model Mx Rugged B
13 (43)
User Manual
© Bittium 2017
Figure 5 Inserting the battery pack
Caution: Make sure that the seal inside the battery pack is intact and that the bat-
tery pack and the battery housing are clean before inserting the battery pack.
Wipe the battery pack with a clean cloth, if required
.
1.
Insert the battery pack in place so that all sides are closed. Make sure the top of the
battery pack is also properly in place before locking it.
2.
Rotate the lock ring tab 180 degrees clockwise.
3.
Push the lock ring tab down.
4.
Charge the battery. Use the wall charger to charge the battery full before using the de-
vice for the first time. Connect the USB cable from the charger to the USB port at the
bottom of the device.
The device can also be charged via a computer using the USB cable or in a dedicated mul-
ticharger or in a car cradle charger.
If the battery is completely discharged, it is not possible to turn on the device immediately af-
ter connecting the charger. Let a depleted battery charge for a few minutes before turning on
the device.