If needed, remove excess body
hair using a razor or an electric
shaver. Clean the skin accord-
ing to the instructions given
by your clinic or the person
responsible for treatment. The
skin should be clean and dry
when attaching the electrode.
Quick Guide
for using Bittium OmegaSnap
™
ECG Electrode
REMOVE
REMOVE
1.
Make sure the electrode pouch is unopened before use.
Tear open the pouch and remove the electrode.
2.
Remove the plastic liner
(marked I) of the electrode.
Do not touch the adhesive
surface with fingers.
3.
HOLD
HOLD
HOLD
I
REMOVE THIS
AFTER
APPLYING TO THE SKIN
REMOVE
REMOVE
Fix the electrode onto the
skin. Place the top of the
electrode approximately
two fingers’ width below
the suprasternal notch. The
bottom of the electrode
reaches just above the
diaphragm.
4.
Copyright © 2021-03-09 Bittium. All rights reserved. Document number: 5800638A01.
