Rev. 1.00
- 39 -
SRP-275II
C. 59.5mm is the recommended dimension.
The position of the manual cutter can be adjusted to another dimension using the GS (E command).
If paper longer than 59.5mm is used, the first receipt cannot be used when exchanging or reloading the roll
paper since it has been ejected.
When the black mark is preprinted in the range between the manual cutting position to the position of
59.5mm:
Set the amount of the cutting position adjustment (a = 116 for the forward direction) with <Function 5> of
the GS ( E command).
D. Minimum distance of the black marks
If you use the receipt with a length other than 127mm, the distance between the black marks must be
more than 65mm.
3-3-4-3 The specifications of print density for the black mark.
Density print of the black mark: 1.0 or more
Density of the non-black mark: 0.1 or less
GretagMacbeth density meter DensiEye 700(filter Unpolarized) used.
3-3-5 Ribbon Cassette Specification
Item
Description
Remark
Model RRC-201
B/R
Color
Black & Red
Size
13 mm (W)
ⅹ
6 mm (L)
Life (*1)
• Black : 1.5 million characters (with continuous printing at 25 (77 ))
℃
℉
• Red : 750,000 characters (with continuous printing at 25 (77 ))
℃
℉
NOTES
(*1) Ribbon life
Ribbon life is based on the following conditions:
Character font: 7×9 font (with descenders)
Print pattern: ASCII 96-character rolling pattern. See the example of self test sheet.
Malfunctions and other problems may arise if other than specified ribbon cassettes are used in the printer. The Warranty
may be void if other than specified ribbon cassettes are used. Contact your dealer or place of purchase for more
information about proper ribbon cassettes.