EN
3
1. Introduction
This meter measures AC/DC Voltage, AC/DC Current, Resistance, Frequency
(electrical & electronic), Diode Test, and Continuity. It features a waterproof,
rugged design for heavy duty use. Proper use and care of this meter will provide
many years of reliable service.
2. Safety
This symbol adjacent to another symbol, terminal or operating
device indicates that the operator must refer to an explanation in
the Operating Instructions to avoid personal injury or damage to
the meter.
This
WARNING
symbol indicates a potentially hazardous situation
which if not avoided, could result in death or serious injury.
This
CAUTION
symbol indicates a potentially hazardous situation
which if not avoided, may result damage to the product.
This symbol advises the user that the terminal(s) so marked must
not be connected to a circuit point at which the voltage with respect
to earth ground exceeds (in this case) 1000 VAC or VDC.
This symbol adjacent to one or more terminals identifies them as
being associated with ranges that may, in normal use, be subjected
to particularly hazardous voltages. For maximum safety, the meter
and its test leads should not be handled when these terminals are
energized.
This symbol indicates that a device is protected throughout double
insulation or reinforced insulation.
Test Leads
WARNING :
Operation is limited to CAT II
applications when the insulated tips are
removed from one or both test probes.
Refer to input limits section in this manual
for maximum voltage ratings.
Exe_Notice_BIZ780312_EN-FR-NL.indd 3
15/05/2019 17:37
