BJ-884-A BJOY Hand A
Page 4
3_ How to use the BJOY Hand A mouse
In order to use the BYoy Hand A mouse you have to connect the
connection cable to the computer’s USB port. Once the computer has
recognised the device you can use the mouse.
In order to move the cursor you just have to move the joystick in the
desired direction. When you move the cursor you have to remember
that it is a progressive control, i.e. the speed of the cursor is adapted
to the action of the joystick: more action more speed, and vice versa.
For the clicks you have to use the buttons A, B, C and D indicated on
the device. By defect the following functions are assigned to these
buttons:
The drag function is activated by pressing the button once. The
cursor is then activated as if the left click was being pressed. Use the
joystick in order to drag to the desired place. To deactivate this
function the drag button must be pressed again.
Take into account that both the actions on the buttons and the
movements of the cursor can be configured using the configuration
software which is described below.
4_ BJOY configuration software
The BJOY configuration software allows you to configure the mouse
behavior according to the user needs.
4.1. Installation
To install the program, you must follow these steps:
1º
Insert the CD included with the BJOY mouse in the CD-ROM drive
of your computer or download the
BJOYSetup.exe
file from:
http://www.bj-adaptaciones.com/en/products/bjoy-stick-a
NOTE:
If using the CD and your computer does not have CD-ROM,
you can copy the CD contents on a USB stick or any other
removable drive.
Entry A:
Left click
Entry B:
Right click
Entry C:
Double click
Entry D:
Drag - drop
Summary of Contents for BJOY Hand A
Page 8: ......
