BJ Take Inc
220 Ramsey Drive Dunnville, ON N1A 0A7
2
of
2
Luminaire Installation:
BLSPC-W27
Step 1:
Attach the Mounting brackets to the BLSPC body.
(See Figure 1)
Step 2:
Place the fixture against the celling and screw fixture into place using the mounting bracket that are attached to the fixture.
The minimum gap between fixtures is 0.25” and the minimum space between the fixture and the cove is 4.00”.
(See
Figures 1-3)
Step 3:
See
Electrical Connections
for wiring information and
See Figure 2.
Electrical Connections:
Step 1:
On the last fixture insert the male end cap into the open socket.
Step 2:
Connect the fixtures together by using the W27 black power jumpers. (See table below)
Step 3:
Power the fixtures by connecting the W27 black power cord to the fixture and plugging it into a standard outlet.
W27 option can only be used with the following cords.
Order Guide for Jumpers and Power Cord
Part #
Description
15578 W27 4ft Black Power Cord Assembly
15579 W27 18inch Black Power Jumper Assembly
15599 W27 8inch Black Power Jumper Assembly
15634 W27 36inch Black Power Jumper Assembly
15599 - W27 8inch Black Power Jumper Assembly
8.00
15579 - W27 18inch Black Power Jumper Assembly
18.00
36.00