BJ Take Inc
220 Ramsey Drive Dunnville, ON N1A 0A7
2
of
3
Figure 4.
Figure 5.
Wiring
Step 1:
Open the fixture by un-latching the latches around the
housing to remove the lens.
(See Figure 4)
Step 2:
Remove the gear tray by pinching the retainer clips on
the ends of the fixtures.
(See Figure 5)
Step 3:
Make the following connections.
(See Electrical
Connections)
Step 4:
Snap the gear tray back into place and re-install the lens.
