Page. 4
1.
Connect the ethernet cable delivered with the product to any of the ports 1, 2, 3 or 4 of
the router.
2.
Connect the other end of the ethernet cable to the ethernet port of the PC.
3.
If
there’s
an Internet connection through the
center’s
network installation, connect an
ethernet cable between the port of the router indicated as WAN and the ethernet port
available in the room.
4.
Connect the router
’s power supply
.
5.
Wait few minutes for the router to start and the SHX WIFI connection will be available.
LED indicators on the router
O
n the router there’re 4 LEDs which indicate the router’s stat
us:
IMPORTANT:
With a correct assembly and internet connection the 4 LEDs should be on.
IMPORTANT:
If there is a lack of internet connection, LEDs 1, 2 and 4 would be on.
1
Router connected
WIFI network of the router activated
Internet connection available
There’s an element connected to ports 1
-4
2
3
4
