- 4 -
KNG-S Model Cloning
KNG-S radios allow for three cloning options:
Active Zone
- Copies the information in the Source radio’s active
zone to the Target radio’s active zone.
Zone-to-Zone
- Allows for selection of any zone in the source radio to
be copied into any non-blocked zone in the Target radio.
Entire Radio
- Copies all non radio specific data from the Source
radio to the Target radio. Radio specific data includes P25 ID, serial
number, encryption keys and passwords.
Zone-to-Zone and Entire Radio cloning are available only when cloning
between two KNG-S models and not supported by other KNG portables,
mobiles or legacy radios.
Zone Cloning Information
Cloned zone information includes:
Channel and Zone Labels
Bandwidth
Frequencies
Low Power Selection
Operating Modes
ANI Settings
Code Guards (CG)*
Zone Priority Settings
Network Access Codes (NAC)*
Zone Scan List Selection
Squelch Operation
Security Settings
Talk Groups*
OTAR Channel
Scan List
*If picklist selections are assigned in the source radio, the associated
value will be cloned to the target radio. For instance, if a channel has a
picklist selected NAC whose value is $123, then $123 will be sent to the
target radio. The target radio picklists will not be affected.
Entire Radio Cloning Information
When “Entire Radio” is selected from the cloning menu, information from
the all zones is sent to the corresponding zones of the radio Target radio.
NOTE:
Radios programmed with any zones blocked from receiving
cloning information will not accept an “Entire Radio” clone.
Entire Radio cloning transfers all radio information except the following:
Radio Serial Number
Encryption Keys
P25 Identification Number
Passwords
