BK TECHNOLOGIES BKR0701, User Instructions

- 1 -

Operation

The BKR0701 Cloning Adaptor offers radio users the ability to share 

programmed information between BKR portable and KNG portable 

radios. For proper operation, the BKR0701 Cloning Adaptor must be 

used in conjuction with the KAA0700 Cloning Cable.

For BKR to KNG cloning, one BKR0701 Cloning Adaptor and one 

KAA0700 Cloning Cable are used as shown below:

KNG

BKR

Cloning in 

Progress

Destination Clone 

Mode

Waiting...

BKR0701

KAA0700

For BKR to BKR cloning, one BKR0700 Cloning Adaptor should be used.

The Source radio is a radio programmed with the desired radio 

frequencies and settings you wish to transfer to another radio of the 

same frequency range. 
In order to clone radio information the Source radio must have a menu 

item programmed, via PC Radio Editor, to allow cloning. (Refer to the 

“Menus/Controls” section of the radio editor.)
The radio receiving the program is referred to as the Target.
Target radios can be programmed to block incoming cloning information 

on a zone by zone basis.