background image

 

FULL  SIZE

GAS  CONVECTION  OVENS

Models:  COB-G  &  COM-G

INTENDED  FOR  OTHER  THAN  HOUSEHOLD  USE.  RETAIN  THIS  MANUAL  FOR  FUTURE 

REFERENCE.  OVEN  MUST  BE  KEPT  CLEAR  OF  COMBUSTIBLES  AT  ALL  TIMES.

This  equipment  has  been  engineered  to  provide  you  with  year  round  dependable  service  when  used 
according  to  the  instructions  in  this  manual  and  standard  commercial  kitchen  practices.

                                           

Form  #  8898550  8/07

IMPORTANT  INSTRUCTIONS:

   

After  the  gas  supply  has  been  connected  to  your  unit,  it  is 

extremely  important  to  check  piping  for  possible  leaks.  To  do  this,  use  soap  and  water  solution 
or  solutions  that  are  expressly  made  for  this  purpose.  DO  NOT  USE  matches,  candles, 
flames,  or  other  sources  of  ignition  since  these  methods  are  extremely  dangerous. 
Instructions  to  be  followed    in  the  event  you  smell  gas  should  be  posted  in  a  prominent 
location.  Obtain  these  instructions  from  your  local  gas  supplier. 

!

!

!

!

WARNING:

  Initial  heating  of  oven  may  generate  smoke  or  fumes  and  must  be  done 

in  a  well-ventilated  area.  Overexposure  to  smoke  or  fumes  may  cause  nausea  or 
dizziness.

1

FOR  YOUR  SAFETY: 

Do  not  store  or  use  gasoline  or  other  flammable  vapors  and 

liquids  in  the  vicinity  of  this  or  any  other  appliance.

!

!

WARNING: 

Improper  installation,  adjustment,  alteration,  service  or  maintenance 

can  cause  property  damage,  injury  or  death.  Read  the  Installation,  Operating  and 
Maintenance  Instructions  thoroughly  before  installing  or  servicing  this  equipment.

!

!

Phone:

(864)  963-3471

                                                                                                                                                           

Fax: 

(864)  963-5316 

                                                         

Toll  Free:  (800)  927-6887                                           
Website:  www.bkideas.com
E-mail:

customerservice@bkideas.com 

BKI  Worldwide  Headquarters

PO  Box  80400

Simpsonville,  SC  29680-0400  USA

INSTALLATION  AND  OPERATING  INSTRUCTIONS

Summary of Contents for COB-G

















Reviews: