background image

 

Warranty Information 

 

LIMITED ONE YEAR WARRANTY

 

BKI (The "Company") warrants to the original purchaser that at time of shipment from the 
Company factory, this equipment will be free from defect in materials and workmanship.  Written 
notice of a claim under this warranty must be received by the Company within ONE YEAR from 
the date of installation, but no longer than ONE YEAR AND THREE MONTHS from date of 
shipment from the factory.  Defective conditions caused by abnormal use or misuse, lack of or 
improper maintenance, damage by third parties, alterations by unauthorized personnel, acts of 
God, failure to follow installation and/or operating instructions, or any other events beyond the 
reasonable control of the Company will NOT be covered under this warranty.  The obligation of 
the Company under this warranty shall be limited to repairing or replacing (at the option of the 
Company) any part, with the exception of lamps, fuses, and glass (which are not covered under 
warranty), which is found defective in the reasonable opinion of the Company. Any part found 
defective by the Company will be repaired or replaced without charge F.O.B. factory, 
Simpsonville, South Carolina or F.O.B. authorized BKI Distributor. The Company and/or its 
authorized representatives will assume the normal replacement labor expense for the defective 
part for the period of the warranty as stated above, excluding travel and/or other expenses 
incidental to the replacement of the defective part, where replacement work is performed during 
standard business hours and not subject to overtime, holiday rates, and/or any additional fees. IN 
NO EVENT SHALL THE COMPANY BE LIABLE FOR LOSS OF USE, LOSS OF REVENUE OR 
LOSS OF PRODUCT OR PROFIT OR FOR INDIRECT OR CONSEQUENTIAL DAMAGES 
INCLUDING BUT NOT LIMITED TO, FOOD SPOILAGE OR PRODUCT LOSS. WARRANTY 
DOES NOT COVER GLASS BREAKAGE.  THE ABOVE WARRANTY IS EXCLUSIVE AND ALL 
OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE EXCLUDED INCLUDING THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

 

REPLACEMENT PARTS 

 
Any appliance replacement part, with the exception of lamps, fuses, and glass, which proves to 
be defective in material or workmanship within ninety (90) days of installation will be replaced 
without charge F.O.B. Factory, Simpsonville, SC or F.O.B. authorized BKI Distributor.  The user 
shall have the responsibility and expense of removing and returning the defective part to the 
Company as well as the cost of reinstalling the replacement or repaired part. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for FKF

















Reviews: