Installation Manual
Fingerprint scanner and code keypad
2.2 Installation in aluminium/plastic doors
In order to install the module, a cutout with the dimensions 38 x 66 mm and a depth of
45 mm is required. The recommended installation height of the module is between 1.2 and
1.4 m above finished floor level.
The connecting cable must be routed within the profile to the installation cutout for the
module.
The module is screwed sideways from the rebate into the profile using the enclosed 3.9 x 50
screws. It may be necessary attach the mounting frame to the module rotated through
through 180°. The fastening hole with the larger diameter must always face in the direction of
the rebate.
The lateral fastening position from the front of the profile can be varied between 18.7 and
25.3 mm via the oblong holes of the fixing bracket.
Finally, glue on the decorative closing profile. The adhesive strips required for this are on the
inside of the closing profile.
Install hole with smaller diameter far
away from the screw head
Screw is self-tapping
18.5 up to 23.5
1200 up to
1400 above
fixed floor
level
Thickness
1.7
Installation Manual, edition 3 dated 02/01/2013
Page 26
Copyright © BKS GmbH, 2012. All rights reserved.
C 59 501 107
