www.bkte.pl
AL200 swinghandle manual
12
4.6
LED signalling
The handle has a three-color LED indicating the operating status. The basic operating states are summarized in the table below. The particular
LED signalling is described in the individual master and user card programming procedures.
LED state
Swinghandle working state
Orange is on
The device is in programming mode.
Orange blinking (1Hz)
The device is booting (within 3 seconds after connecting the power)
or firmware error (if it blinks for more than 3 seconds).
Red is on
The electric lock of the device is closed and handle is closed.
Red blinking (1Hz)
The electric lock of the device is closed, but the handle is open.
Green is on
The electric lock of the handle is open for 2 seconds after touching the
authorized user card.
5
Operation mode in the access control system
The handle can work as only a cabinet door opening mechanism in a larger access
control system. It can cooperate with any access control system, eg BKT ACS or any
other company. The handle should be connected to the access controller that controls
its operation. The handle can transmit information to the controller about the current
position of the handle (tilted/not tilted).
5.1
Connection
Connection diagram of the handle with the external access control system
The handle connection cable can be extended to a maximum length of 100m using eg. UTP cat.5e twisted pair.
LED
External access
controller
white
brown
green
yellow
grey
pink
blue
red
Unused wires must
be insulated.
4-pin socket
8-pin socket
AW285 cable
Power supply for external devices
Input for handle position
Relay or OC control output
